Piperonyl Butoxide 95% CAS#51-03-6

Marked Synergistic Boosting Effect: It can substantially elevate the insecticidal potency of pyrethrins, synthetic pyrethroids, rotenone and carbamate‑class insecticides.

Wide Compatibility with Pesticide Agents: It reinforces the efficacy of multiple active substances including fenitrothion, dichlorvos, chlordane and atrazine.

Enhanced Stability for Pyrethrum Extract Preparations: It aids in stabilizing pyrethrum‑containing formulations and optimizes the comprehensive performance of finished products.

Superior Synergistic Action in Target Scenarios: It delivers prominent synergism when combined with permethrin against houseflies, and surpasses octachlorodipropyl ether under certain test conditions.

Product Description of Piperonyl Butoxide 95% CAS#51‑03‑6

Piperonyl butoxide, also known as synergist ether, is capable of amplifying the insecticidal potency of pyrethrins, diverse pyrethroid compounds, rotenone and carbamate insecticides. It also boosts the insecticidal performance of active ingredients including fenitrothion, dichlorvos, chlordane, triclofenac and atrazine, and delivers synergistic benefits that improve the stability of pyrethrum extracts.

In bioassays targeting house flies, this ingredient demonstrates more potent synergism with permethrin compared to octachlorodipropyl ether. Nevertheless, it fails to strengthen the knockdown activity of cypermethrin against house flies.

For mosquito coil formulations, it presents no synergistic effect toward allethrin and may even weaken its insecticidal efficacy.

1783304697126105.jpg.webp

Product Parameters of Piperonyl butoxide 95% CAS#51-03-6

Density

1.059

Melting point

<25 °C

Boiling point

180 °C

Refractive index

1.497-1.507

Flash Point

340° F (NTP, 1992)

Vapour Pressure

0.02 hPa (60 °C)

Precise Quality

338.209

PSA

46.15

logP

3.7177

Solubility

light yellow liquid

Viscosity

Viscosity is a measure of a fluid's resistance to flow. It describes the internal friction of a moving fluid.

AnalyticLaboratory Methods

Method: OSHA PV2110; Procedure: high performance liquid chromatography using an ultraviolet detector; Analyte: piperonyl butoxide;; Matrix: air; Detection Limit: 0.08 mg/cu m.

Appearance

Piperonyl butoxide is a pale yellow to light brown liquid with a mild odor and a faint bitter taste. (NTP, 1992)

Storage

Ambient temperatures.

Chemical Properties

Practically insoluble in water, freely soluble in acetone, in anhydrous ethanol, in methylene chloride and in fatty oils.

Color/Form

Clear yellow

Corrosivity

NONCORROSIVE

Decomposition

When heated to decomp it emits acrid smoke and irritating fumes.

Odor

ODORLESS

Physical

PHYSICAL DESCRIPTION: Pale yellow to light brown liquid with a mild odor and a faint bitter taste. (NTP, 1992)

Water Solubility

H2O: <0.1 g/100 mL at 18 oC

Spectral Properties

Index of refraction: 1.50 at 20 deg C/D
Intense mass spectral peaks: 176 m/z (100%), 177 m/z (41%), 194 m/z (26%), 57 m/z (19%)

Stability

Stable. Combustible. Incompatible with oxidizing agents.

StorageTemp

2-8°C

1783304705163264.jpg.webp

Product Application of Piperonyl Butoxide 95% CAS#51‑03‑6

It is applied for the management of insect pests arising during grain storage for rice, wheat, beans and other cereals, with granary weevils as one of the target pests.

It is frequently blended with pyrethrin‑based insecticides to generate remarkable synergistic action. Pyrethrin used singly achieves roughly 46% mortality against house flies for instance; once combined with this product in the formulation of 30 mg plus 400 mg, the kill rate can rise to 92%.

This synergist is generally compounded with pyrethrin at a ratio around 1:10 to manufacture emulsions or dust formulations ranging from 0.05% to 0.2%. Upon treatment, its residual effect delivers insect repellency lasting roughly 1 to 10 months.

Under Japanese regulatory standards, it is permitted for use on cereal grains with a maximum residue limit of 0.024 g/kg calculated on this active substance. A representative compound insecticide formulation contains 1.2% piperonyl butoxide, 0.08% pyrethrins and 98.72% inert mineral carriers, with a recommended spray dosage of approximately 120 g for every 60 kg of stored grain.

1783304713225815.jpg.webp

Online Consultation

Please fill out the form below and we will contact you as soon as possible